Product Video
Product Parameters
| Technical Parameters | |
| Lamp Power(W) |
4000w |
| Open Circuit Input Current(A) |
7.5A |
| Open Circuit Output Voltage(V) |
310V~320V |
| Short Circuit Input Current(A) |
18A |
| Short Circuit Output Current(A) |
21A |
| Iput Volts(V) |
220V/50HZ |
| Working Current(A) |
17A |
| Power Factor(PF) |
>90% |
| Dimension(mm) | |
| A |
400 |
| B |
200 |
| C |
206 |
| D |
472 |
| Weight(KG) |
25.7 |
| Outline Diagram |
Diagraml&Diagram2 |
| Capacitor |
60uF/540V*2 |
| Dimensions(AxBxCmm) |
150*125*66 |
| Weight(KG) |
0.45 |
| Outline Diagram |
Diagram3 |
| Ignitor |
YK2000W~5000W |
| Dimensions(AxBxCmm) |
83*64*45 |
| Weight(KG) |
0.25 |
| Outline Diagram |
Diagram4 |
Precautions for the use of fish lamp ballast
1) Please install or replace the ballast under the condition of power failure to
Prevent electric shock or other injuries;
2) When installing or replacing ballast, please wear gloves and handle it
Handle with care; Avoid injury caused by ballast falling;
3) Before installing or replacing the ballast, check the generator or power grid
Whether the power supply voltage, power frequency and ballast are,
If not, stop the installation and consult the company's technical support
Staff;
4) The ballast of this product series is not suitable for flammable and explosive environment
Or environment containing corrosive gas and conductive dust;
5) The ballast of this product series should be well ventilated,
Ambient temperature ≤ 40 ° C, ambient humidity ≤ 90% and ballast shell
Spacing ≥ 200mm; Recommended design for centralized installation of ballast
Good ventilation and exhaust system to prevent the ballast from overheating and burning,
Even fire.
6) During the installation process, the installation of all wiring terminals shall be carried out in accordance with relevant regulations
According to the electrician's standard operation method;
7) The ballast of this series shall be reliably fixed on the ship, which is too large
The impact or vibration of the ballast will deteriorate the performance of the ballast;
8) The ballast shall be installed with reliable grounding wire to avoid electric shock
The accident happened.
About us
Our workshop
Our warehouse
Customer use case
Our service
